12
SANDPUP TRAILER & SKID UNIT
APPLIES TO: SANDPUP TR 300 AND SK 300
OPERATING INSTRUCTIONS
5-WATER FLUSH
1.
It is not necessary to flush the system every day. We suggest
removing the spray tip and plugging the wand, when not in use or
transporting from job to job.
2.
If the machine is going to be out of service for a week or more,
then water flush the system.
3.
If outfitted with the water option, close main tank valve M5 and
open the small water flush valve M3 that is on the basket strainer
M2.
4.
Open pump air control valve A6 and your spray wand valve M6.
Pump until water runs clear.
5.
On basket strainer M2 is a water check valve P10, this helps keep
sealer from flowing into the water tank if you leave the valve
open. Do not rely on this check valve, always close the water flush
valve M3.
6.
If you do not have the water option, close main tank valve M5.
Remove the lid assembly from the basket strainer M2.
7.
Open pump air control valve A6 and pour water into the basket
strainer M2, as it is being pumped to the spray wand.
Note:
Skid tank configuration is different from the trailer, but the
operation is the same.
Содержание SK300
Страница 1: ......
