Sealite SL-155 Series страница 45 Скачать руководство пользователя | Manualshive

Страница: 45 / 76

background image

SL-155-5D/10D Models (integrated AIS)

6-13NM Marine Lanterns

Latest products and information available at

www.sealite.com

45

Installation

The main installation and commissioning steps are:

1. Mount the transceiver in a suitable location on the physical Aid to Navigation
2. If using an external VHF antenna, install the VHF antenna according to the

manufacturer’s instructions

3.  Connect any sensor interfaces and light / RACON monitoring signals
4.  Connect power to the transceiver
5.  Configure and commission the transceiver via USB (note that this step can be carried

out on shore prior to installation in a remote location)

Description of the proAtoN Programming Software Tool

The proAtoN PC application is supplied on the CD packaged with the transceiver. The

application provides features for configuration of the transceiver and confirming correct

operation before deployment. The main features of the application are:

•  Configuration of essential transceiver parameters such as MMSI, name and dimensions
•  Configuration of reporting schedules
•  Configuration of virtual and/or synthetic AtoN reporting schedules
•  Configuration of other messaging features
•  GNSS diagnostics
•  System diagnostics and alarm display
•  Configuration of the source for external equipment status information
The SL-155 AIS AtoN supports VDL configuration and chaining. For further information

please contact Sealite for support.

Installing the proAtoN PC Software Tool

The proAtoN should be installed from the CD supplied with the transceiver. The steps to

complete the installation are as follows:

1.

Insert the CD into your PC

2.

Navigate to the proAtoN folder on the CD

3.

Double click the ‘setup.exe’ item to start the installation process

4.

Follow on screen instructions to complete the installation

Following successful installation, the application can be launched from the proAtoN folder in

the Windows start menu.

USB device drivers for the transceiver are installed automatically during installation of

proAtoN.

«
...
43
44
45
46
47
...
»

Содержание SL-155 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для SL-155 Series

Бренд: obsta Страницы: 37

Бренд: EHEIM classic Страницы: 128

Бренд: HAMPTON BAY Страницы: 12

Бренд: Gamma Страницы: 16

Бренд: Urban Electric Страницы: 2

WAT GSE Junior Executive

Бренд: Whelen Engineering Company Страницы: 4

Бренд: Diamante Страницы: 20

Бренд: LIGMAN Страницы: 7

Бренд: Champlain Страницы: 8

ShadowMaster VPL-1039 Series

Бренд: Volt Страницы: 5

Бренд: Showline Страницы: 8

METRica LED L LG 230

Бренд: Beghelli Страницы: 2

Бренд: Beghelli Страницы: 2

Бренд: ACME Страницы: 28

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды