Latest products and information available at www.sealite.com
10
Radio Controller
Using the Radio Control to Activate
the Radio Controlled System
The Radio Controller is very easy to use and by reading through the How To section below all of the
advanced features will be well within your grasp.
Make sure that all the lights in the same Light Group have had the rotary switches set correctly, see
page 7 for details.
Turn all the lights ON
•
Turn the Radio Controller On
•
Use the arrow keys to adjust the Operational Mode to
Always ON
• Press
MENU
button once to reach
Light Group
•
Use the arrow keys to set the Light Group to ALL
• Press
SEND
button
•
Every radio light within range of the control unit will now turn on.
Setup the lights to operate in DUSK till DAWN mode.
•
Turn the Radio Controller unit On
•
Use the arrow keys to adjust the operational Mode to
Dusk till Dawn
• Press
MENU
button once to reach
Light Group
•
Set the Light Group to
ALL
• Press
MENU
button until you reach
Light Sensor
•
Use the arrow keys to adjust the Light Sensor to
Enable
• Press
SEND
button
•
Every radio light within range of the control unit will now turn on at night, during the day the lights
will turn off automatically.
Note:
if the lights were already in Always ON mode they will stay on for up to 60 seconds while the
light sensor activates.
Channel B only is to be HIGH Intensity, but Channel A will remain in current
configuration.
•
On Channel A, set the rotary switches to A=0 B=0 inside the light head.
•
On Channel B, set the rotary switches to A=1 B=0 inside the light head.
Rotary Switch A can be set to any value that is different from Channel A.
•
Turn the Control unit On
•
Use the arrow keys to adjust the operational Mode to
Always On
• Press
MENU
button once to reach
Light Group
•
Set the Light Group to 1
• Press
MENU
button once to reach
LED Intensity
•
Use the arrow keys to adjust the LED Intensity to
HIGH
• Press
MENU
button until you reach
LED Bank Setup
•
Use the arrow keys to adjust the LED Bank to
Visible
• Press
SEND
button
-
Channel A will not change state.
-
Channel B will now be High Intensity.
