GSM Cell-Phone
Monitoring & Control System
Latest products and information available at
www.sealite.com
13
An alarm is an SMS text message which is sent after a preset alarm condition programmed into the
lantern is triggered. Care should be taken when selecting suitable alarms as they can generate large
numbers of SMS text messages if not carefully selected.
The report list establishes the cell phone numbers that the alarms will be sent to.
Programming Report List
The following process will create a list of approved cell phone numbers from which desired alarm reports
will be sent;
• This creates an authorised list of cell
phone numbers belonging to staff,
on-call company maintenance officers or
contractors.
• For example, to add an Australian cell
phone number to the report list the SMS
text message command would be:
add 61400987654
• The SMS text message ‘report’ sent from
on-call company maintenance officers or
contractors in this list will now generate the
standard report SMS text message reply
from the lantern.
A successful update will result in an SMS text
message reply:-
Report List
+(designated cell phone numbers)
The designated cell phone number has now been
added to the ‘report’ list. The Sealite GMS module
will now accept an SMS text message request for
status ‘report’ from this number.
Use a cell phone in the access list to create
the report list by sending the SMS text message:-
add (country code)(phone number)
More than 1 cell phone number can be included in
the SMS text message. To do this separate each
cell phone number with a ‘comma’ character.
A typical response SMS text message report message from a lantern will display as below:
------------------------------------------
List Report
+61400111222
------------------------------------------
Note: The actual layout of the message is dependent on your cell phone screen.
STEP 3:
Program Desired Cell Phone Report List & Alarms
