10
STEP 2:
Program Cell Phone Access List, Web Reporting & Essential Commands
The Access List is a list of cell phone numbers from which the Sealite GSM Monitoring and Control
System will accept configuration commands and report requests. Web reporting and essential
commands may also be setup at this step.
Follow the process below to program the Access List, Web Reporting and Essential Commands;
• The lantern will accept the first cell phone
contact for instructions.
• The first instruction must be correct as the
lantern will then only respond to the access
cell phone number(s) given.
Two numbers should be provided to the
lantern to ensure there is a backup access**.
• “+” and the country code (eg. 61 for
Australia, or 44 for U.K) are required to
establish the country prefix in which the
GSM unit is to operate in. Additional cell
phone numbers can then be added by
sending commands from those numbers
given access.
• For example, to add an Australian cell
phone number to the access list the SMS
text message command would be:
add 61400987654
All additional telephone numbers
added to the access list must be in the
international format.
• Once the number has been added to the
access list the Sealite GSM Monitoring
and Control System will accept commands
from these numbers and acknowledge
confirmation via reply SMS text message.
• This command initiates the daily web
reporting, which sends a daily diagnostic
update to be viewed from your secure login
at the Sealite Website.
Enable web reporting by sending the SMS
text message:-
add autoreport web
or
add alarm web
Add cell phone numbers to the permitted
access list by sending the SMS text message:-
add (country code)(phone number)
More than 1 cell phone number can be included in
the SMS text message. To do this separate each
cell phone number with a ‘comma’ character.
Select a cell phone from which the GSM
Monitoring and Control System module will be
activated.
Only phone numbers listed in the Access List will be able to “Set” and “Get” lantern information.
**In the event that the access cell phone number(s) is lost or no longer in service, Sealite can reset the lantern from the factory if required.
