Diesel Compression GauGe, Hose & TDC
Base KiT
Model no:
Vse3157
Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safeTy
WarninG!
Ensure Health and Safety, local authority and general
workshop practice regulations are adhered to when using tools.
8
Do noT
use tools if seals or threads are damaged. Any defective
seal
musT
be changed before use to avoid incorrect readings.
9
Maintain tools in good and clean condition for best and safest
performance.
9
ensure that a vehicle which has been jacked up is adequately
supported with axle stands.
9
Wear approved eye protection. A full range of personal safety
equipment is available from your Sealey dealer.
9
Wear suitable clothing to avoid snagging.
Do noT
wear jewellery
and tie back long hair.
9
ensure any disconnected fuel pipes are plugged to avoid spillage.
9
ensure that the correct connector is used for the engine being
tested.
9
Compression tests on diesel engines should be conducted when
the engine is cold.
9
Keep a fire extinguisher to hand.
9
Use proper ventilation and avoid breathing in exhaust fumes.
9
ensure you keep tester at arms length when relieving pressure to
avoid personal injury.
9
Fuel delivery must be prevented by either operating the engine
stop lever or disconnecting fuel pump solenoid.
9
Protect hands from burns, as quick release coupling and
adaptors may become very hot during use.
9
always
release the pressure from the gauge before disconnecting
the quick release coupling.
9
Account for all tools and parts being used,
Do noT
leave them in
or near the engine. Return all parts to the case and store this in a
safe, dry, childproof location.
imporTanT:
Always refer to the vehicle manufacturer’s service
instructions, or a proprietary manual, to establish the current
procedure and data. These instructions are provided as a guide only.
2. inTroDuCTion
diesel engine glow plug compression test adaptor kits that cover a wide range of modern vehicles. For use in conjunction with Sealey diesel
Compression Gauge, Hose & TdC Base Kit (Model no. VSe3157). See Sealey website for complete vehicle applications.
3. speCifiCaTion
Model no: ...............................................................VSe3157
nett Weight: ................................................................1.82Kg
Associated Tools: .................. VSe3151, VSe3152, VSe3153
Pressure Release Valve
fig.1
VSe3157 Issue 2 18/02/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
