background image

12V OIL PUMP 

MODEL NO: 

TP9312

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

9

   Maintain the pump in good condition (use an authorised service agent).

 

9

   Replace or repair damaged parts. Use recommended parts only. 

Non authorised parts may be dangerous and will invalidate the  

 

 warranty.

 

9

   Keep the pump clean for best and safest performance.

 

9

   Familiarize yourself with the applications, limitations and potential hazards of the Transfer Pump.

 

9

   Ensure the power supply (vehicle battery) corresponds with the requirements of the pump. 

 

9

   Ensure that there is more liquid in the delivery tank than will be needed.

 

9

   Ensure that the capacity of the receiving tank is sufficient to hold the dispensed fuel.

 

9

   Wear safety goggles and gloves, and protective clothing when working around fuel. A full range of personal safety equipment is  

 

 available from your local Sealey Stockist.

 

9

   Keep area clean and tidy and free from unrelated materials, and ensure there is adequate lighting.

 

9

   Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.

 

9

   Use the pump in an appropriate working area for its function. Keep area clean and tidy and free from unrelated materials.

 

9

   Keep children and unauthorised persons away from the working area.

 

8

  

DO NOT

 run the pump dry. This will damage the pump’s internal components and will invalidate your warranty.

 

8

  

DO NOT

 operate the pump continuously for more than 30 minutes. The duty cycle of the unit is 30 minutes, after which the motor must  

  be left to cool down for 30 minutes.

 

8

  

DO NOT

 run the unit for more than 2-3 minutes with the delivery nozzle closed.

 

8

  

DO NOT

 start or stop the pump by connecting or disconnecting the battery clamps.

 

8

  

DO NOT

 operate the pump with wet hands.

 

8

  

DO NOT

 use the pump where explosive or flammable vapours may be present.

 

8

  

DO NOT

 tamper with the pump connections.

 

8

  

DO NOT

 pull or carry the unit by its cables and do not pull the negative and positive clamps from the battery terminals.

 

‰

  

WARNING! DO NOT

 use the unit to pump the following fluids:  Petrol, flammable liquids with flash point <38°C, water, foodstuffs,    

  corrosive chemicals and solvents.

 

8

  

DO NOT

 smoke or allow a spark, or flame in the 

vicinity of the battery or pump.

 

‰

  

WARNING! DO NOT

 use the unit to pump the following fluids: 

 

Petrol, flammable liquids with PM <55°C, water, alimentary liquids with viscosity >20 cSt., corrosive chemicals and solvents.

 

‰

  

WARNING!

 The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations   

  that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must  

  be applied by the operator.

2.  INTRODUCTION

Robust and compact portable pump ideal for extracting engine oil or diesel. Powered from a 12V battery. Supplied with a 1.2m suction hose, 

2m discharge hose and a 1.7m battery cable with clips. Not suitable for use with Petrol.

3.  SPECIFICATION

Model No: ..................................................................TP9312

Current: ..............................................................................7A

Duty Cycle: ................................................................... 30min

Flow Rate: ............................................................. 1.92ltr/min

Power: .............................................................................84W

Voltage: ............................................................................12V

TP9312 Issue 2 04/06/19

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

fig.1

 Wear eye 

protection

 Wear protective 

gloves

 Warning

Отзывы: