4. OPERATION
NOTE:
If unsure of requirements for specific application of Tie Down, seek professional advice
.
4.1.
INSTALLING STRAP
4.1.1.
Feed webbing through the slot in the ratchet spool (fig.1) and back on itself.
4.1.2.
Manually pull the webbing through to remove as much slack as possible before ratcheting.
4.1.3.
Start ratcheting by raising and lowering the handle.
4.2.
RELEASING THE STRAP
4.2.1.
Pull the spring loaded release tab (fig.2) to override the ratchet mechanism.
4.2.2.
Open ratchet until it is fully open and flat.
4.2.3.
Pull webbing from the non-fixed side to remove it.
4.2.4.
Close ratchet handle once webbing removed.
NOTE:
For additional information see the Sealey YouTube channel.
5. MAINTENANCE
5.1.
After use, thoroughly wipe down the strap and the ratchet body using a soft,clean and dry cloth.
5.2.
Store the unit in a clean and dry environment.
6. STORAGE
6.1.
Always store in a dry place.
fig.1
fig.2
Release
Tab
Spool
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version
© Jack Sealey Limited
TD Series Issue 1 19/11/21
