Sealey SMS255.V3, Руководство пользователя

Страница: 3 / 7

 Use correct blades. Do not use blades with incorrect size holes. Never use blade washers or bolts that are defective or incorrect.
Refer to unit speci
fi cation for maximum blade capacity etc.
 Inspect and remove all nails from timber before cutting.
 Never touch the blade or moving parts during use.
 Never start the saw when the blade is in contact with the workpiece.
 Keep handles and grasping surfaces dry, clean and free from oil and grease.
 LASER LIGHT. LASER RADIATION DO NOT stare into beam. Only turn laser beam on when tool is on work piece.
2. INTRODUCTION
Powerful 2000W motor. Features integral aluminium workpiece supports which store inside the aluminium base to save space and prevent
loss. Fitted with a 40-tooth TCT blade for fresh wood. Can be
fi tted with Model No. SMS255B multipurpose blade for use with mild steel,
aluminium and wood with nails. Features double slides which can be locked at di ff erent lengths allowing greater control over the desired length
of cut. Max cut of up to 315mm at 0° bevel. Unit is also fi tted with a laser guide to help produce accurate cuts. Supplied with workpiece clamp,
dust extraction bag and fi tted with carry handle. Features locking increments at mitre stops 0°,15°, 22.5°, 30°, 45° Left & Right.
3. SPECIFICATION
Model no ............................................................. SMS255.V3
Blade size ...................................Ø254 x 2.8 x Ø30mm (40T)
Consumable Parts: ............................................. ...SMS255B
Multipurpose Cut-O
ff Saw Blade Ø250 x 2.4mm/Ø30mm 60tpu
Dust extraction port ........................ Ø35mm ID x Ø43mm OD
Motor power ................................................................2000W
No-load speed .......................................................... 5000rpm
Positive mitre lock ............0°,15°, 22.5°, 30°, 45° Left & Right
Supply ............................................................................230V
Cross Cut (0
0 Bevel x 0 0 Table) .......................... 90 x 315mm
Mitre Cut (0° Bevel x 45° Table): ........................ 90 x 215mm
Bevel Cut (45° Bevel x 45° Table): ..................... 40 x 215mm
4. COMPONENTS
SMS255.V3 Issue 1 21/05/21
Original Language Version
© Jack Sealey Limited
fi g.1
fi g.2
1 Handle 11 Turn table locking handle 19 Bevel pointer 29 Flange bolt
2
ON/OFF Switch 12 Pointer 20 Locking screw for drag guide 30 Outer fl ange
3 Lock-o ff lever 13 Mitre scale 21 Drag guide 31 Spindle lock button
4 Machine head 14 Turn table 22 Locking screw knob 32 Inner fl ange
5
Moving blade guard 15 Fixed saw table 23 Fastening bolt 33 Laser
6
Saw blade 16 Stop rail 24 Screw for cutting depth limiter 34 ON/OFF switch for laser
7
Clamping device 16a Extension block 25 Stop for cutting depth limiter 35 Laser compartment
8
Workpiece support 16b Set screw 26 Locking bolt 36 Laser holder
9 Locking screw for workpiece support 17 Sawdust bag 27 Support foot 37 Guide bar
10
Table insert 18 Bevel scale 28 Turn table release lever 38 Adjusting screw