3.1.
PERFORMANCE SPECIFICATIONS
LINE PULL AND LINE SPEED
vary according to how much cable is on the drum. The winch is rated at the first layer of cable on the
drum. The maximum line pull force will be reduced by subsequent layers of cable on the drum. Chart 2 illustrates the maximum line
force at increasing cable layers.
4. INSTALLATION
4.1.
WINCH INSTALLATION
4.1.1.
The winch needs to be mounted onto a steel mounting using the 4 point foot mounting system, in either a horizontal or vertical plane.
4.1.2.
The winch needs to be mounted on a flat surface so that the three sections (motor, cable drum and gear housing) are properly aligned.
4.1.3.
Before installation ensure the mounting position being used is capable of withstanding the winch weight and the rated capacity.
4.1.4.
Use the dimensions in fig.4 to manufacture a steel mounting plate, a minimum of 6mm thick. Fasteners should be high tensile steel,
grade 5 or better. A poorly designed mount may invalidate the warranty.
4.1.5.
The winch should be secured to the mounting with grade 8.8 M12 bolts and spring washers, see fig.5.
CHART 1.
CHART 2.
CHART 3.
RW5675.V2
Rated line pull
5675kg/12500lbs
Gear ratio
171:1
Motor
DC12.6V:6.4hp/4.7kW
Gear train
4 stage gear driven
Clutch
Pull and turn
Braking action
Automatic in the ratchet wheel
Fairlead
4-way roller fairlead
Wire rope
9.2mm x 26m (3/8” x 85.3’)
Drum size
63mm x 222mm (2.48” x 8.74”)
Dimensions
606mm x 172mm x 250mm (23.86” x 6.77” x 9.84”)
Bolt pattern
254mm x 114.3mm (10” x 4.5”)
254 x 165.1mm (10” x 6.5”)
Net weight
41kg (90.2lb)
Layer of cable
Rated line pull/layer (kg/lbs
Cable capacity per layer (m/ft)
1
5675/12500
5.4/17.7
2
4522/9961
12.2/40.0
3
3759/8280
19.8/65.0
4
3216/7084
26/85.3
Line pull
Ibs
0
6000
8000 9500
12500
Kg
0
2722
3629 4313
5675
Line speed
(12V)FPM
45.9
7.2
5.6
3.9
3.0
(12V)FPM
14.0
2.2
1.7
1.2
0.9
Motor current
(12V)Amps
50
260
310
360
390
Fig 6
Fig 5
RW5675.V2 Issue:2(S) 02/05/18
Original Language Version
© Jack Sealey Limited
