list of contents
warnInG!
ensure the sander is switched off and unplugged from the mains power
supply.
6.3
prIMe wHeel replaCeMent
6.3.1 turn the belt tension lever to “loosen”.
6.3.2 remove belt cover and remove the belt (fig 16).
6.3.3 remove motor rear guard (fig 17).
6.3.4 stop the motor shaft from turning by inserting a screw driver in spindle hole (fig 17).
6.3.5 Place socket wrench (chapter 3 item 4.4) over wheel nut, secure motor spindle whilst
loosening nut (fig 18).
6.3.6 remove retaining nut and draw the prime roller off centre spindle (fig 19) and
replace with a new wheel reversing the above process to make ready for use.
7. optIonal Floor stand
no description
Qty
1
stand leg (front & rear) 2
2
stand leg (left & right)
2
3
stand top
1
4
square neck bolt
5/16”-18ncx5/8”
4
5
Hex bolt
5/16” -ncX3/4”
4
6
Washer
5/16”x23/32dx1/16”
12
7
spring washer 5/16”
8
8
Hex nut 5/16” -18nc
8
assembly
1
4
2
3
fig 16
fig 17
fig 18
fig 19
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMportant:
no liability is accepted for incorrect use of this product.
warrantY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
InForMatIon:
for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sole Uk distributor, sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
iP32 7Ar
www.sealey.co.uk
Web
Original Language Version
sm100 issue: 2 - 23/11/09
