5.11.2. Before attempting to use the tool on any sensitive circuit, it is recommended that the auxiliary earth lead is connected to the probe tip
and the power switch pressed forward to trip the circuit breaker. this will prevent the probe tip from being inadvertently
activated during
use and causing damage to electronic components.
5.11.3. After use, press the reset button to restore normal power switch function.
6. maintenance
6.1.
power switch
6.1.1.
Although designed to be a no maintenance tool, the power switch may deteriorate over a period of time through fair wear and tear.
6.1.2.
replacement power switches are available through your sealey stockist and are simple to replace.
6.2.
power switch replacement
6.2.1.
carefully prise the worn power switch from the main casing (fig.16).
6.2.2.
install the replacement power switch by carefully pressing it squarely into the main casing until it locks into place (fig.17).
6.2.3.
connect the tool to a power supply and test the power switch for functionality.
fig.16
fig.17
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
weee reguLations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
environment protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or telephone 01284 757500
