4.
SET-UP
4.1
CONNECTING THE WATER SUPPLY
Use a reinforced hose pipe with an internal diameter of 1/2 and screw a push fit hose connector to the water inlet on the machine
(fig 1). Connect hose to the mains water supply as indicated in (fig 2).
4.2
CONNECTING THE HIGH PRESSURE HOSE
Remove and discard the transit plug from the water out connector on the lower front of the machine (fig 3). Attach the high pressure
hose to the pressure washer (fig 4) ensuring that the connector is tight. Turn on the water supply.
4.3
ASSEMBLING THE LANCE OR DETERGENT DISPENSER
Push the lance/dispenser onto the gun (fig 5) and turn through 90
O
until it clicks into place.
PC1950 - 1 - 190105
