background image

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

ImPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORmATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

Original Language Version

ML18/36.V3    Issue: 1 

- 27/07/11

 

 

 

Environmental Protection.

 

 

Recycle unwanted materials instead of disposing of them as waste. 

 

 

All tools, accessories and packaging should be sorted, taken to a recycle centre and  

 

 

disposed of in a manner which is compatible with the environment.

 

 

When the product is no longer required, it must be disposed of in an environmentally  

 

 

protective way. Contact your local solid waste authority for recycling information.

Battery Removal.

 

 

NOTE!

 The lantern battery is a sealed lead-acid type. By law, it must be removed and  

 

 

recycled, or disposed of properly, according to national and/or local regulations.

 

 

Place the lantern front side down.

 

 

Remove the screws from the rear panel and lift off from the unit enclosure.

 

 

Disconnect the wires from the two battery terminals, taking care to avoid accidental  

 

 

arcing of the terminals.

 

 

Lift the battery out of the casing.

 

 

 

   

Dispose of batteries according to local authority guidelines

.

 

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to 

inform potential purchasers of products containing batteries (as defined within these regulations), 

that they are registered with Valpak’s registered compliance scheme. 

Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705

Parts support is available for this product. 

To obtain a parts list and diagram please log on to www.sealey.co.uk, email [email protected] or 

phone 01284 757500

Содержание ML18/36.V3

Страница 1: ...ug with ASTA BS approval is fitted In case of damage cut off and fit a new plug according to the following instructions discard old plug safely UK only see diagram to the right Ensure the unit is correctly earthed via a three pin plug a Connect the green yellow earth wire to the earth terminal E b Connect the brown live wire to live terminal L c Connect the blue neutral wire to the neutral termina...

Страница 2: ... the event of mains power failure Lantern includes carry handle and floor stand or can also be wall mounted 3 1 CHARGING THE UNIT 3 1 1 The unit will charge when plugged into mains supply regardless of function switch position To achieve fastest charge put function switch to the OFF position 3 1 2 Open the power cable compartment at the back of the lantern Uncoil the power cable and plug it into t...

Страница 3: ...the transparent cover by removing the two cover screws and lifting it away 4 1 3 Each tube can be removed by rotating it in either direction until one of the connector pins appears at the top of the tube holder slot Lift out the old tube and replace it with a new one Push the new tube all the way into the tube holder slots at both ends and then rotate the tube a quarter of a turn in either directi...

Страница 4: ...product is no longer required it must be disposed of in an environmentally protective way Contact your local solid waste authority for recycling information Battery Removal NOTE The lantern battery is a sealed lead acid type By law it must be removed and recycled or disposed of properly according to national and or local regulations Place the lantern front side down Remove the screws from the rear...

Отзывы: