Function
Button
OK
Button
Mode
Button
3. FEATURES / OPERATION
Original Language Version
VS8626 Issue: 1 - 19/07/10
The VS8626 tool:
•
is compatible with the latest CAN vehicles.
•
enables Fuel Additive functions for Replacing Filters, resetting Additive
Reset lights and performing the Regenerate Process.
The new VS8626 Peugeot / Citroen Particulate tool has been designed to extinguish
the Particulate Filter Light after the filter has been replaced, re-set the ELOYS
additive light after it has been topped up, and also burn any particles that have
clogged the filter (regenerate).
Filter Replace –
This is a light on the dashboard that is illuminated when
the filter is clogged and needs changing, or potentially
regenerating.
Additive Reset – This is a light on the dashboard that is illuminated when
the fuel additive is empty or low and needs refilling.
Regenerate Filter – This will increase the engine speed to around 4000 RPM,
which in turn will increase the temperature of the exhaust
gases; this causes the soot that has built up on the filter to
be burnt off.
System Selection for different Fuel Additive Systems.
Mode Selection for functions.
System selection full description.
3.1.
vehicle Set-Up
3.1.1. Ensure that the vehicle is parked outside, on a non-flammable surface and away from any combustibles (the
exhaust system could reach temperatures above 300°C). That it’s engine is at working temperature, with at
least a ¼ tank of fuel and that there are no fault codes stored.
3.1.2. Ensure that the vehicle’s ignition is turned off.
3.1.3. Connect the tool to the correct diagnostic socket on the vehicle, refer to the vehicle owner’s manual
for it’s location.
3.1.4. Turn on the vehicle’s ignition and start the engine.
Function Buttons
