SeaLevel R5120 Скачать руководство пользователя | Manualshive

Страница: 33 / 71

background image

33

© Sealevel Systems, Inc.

R5120 & R5140 Manual | SL9212 10/2021

Standard CMOS Setup Menu, Continued

specifications must match the drive table. The hard disk will not work properly if you enter improper information.
If your hard disk drive type does not match or is not listed, you can use Type User to manually define your own
drive type.

If selecting Type User, you will be asked to enter related information in the following items. Directly key in the
information and press <Enter>. This information should be provided in the documentation from your hard disk
vendor or the system manufacturer.

If the HDD in

terface controller supports ESDI, select “Type 1”

.

If the HDD interface controller supports SCSI, select “None.”

If the HDD interface controller supports CD-

ROM, select “None.”

CYLS

Number of cylinders

LANDZONE

Landing zone

HEADS

Number of heads

SECTORS

Number of sectors

PRECOMP

Write precomp

MODE

HDD access mode

If there is no hard disk drive installed, select NONE and press <Enter>.

Drive A

Selects the type of floppy drive installed in your system, and the default is “None.”

None

(Default) No floppy drive installed.

360K, 3.5 in.

3.5 inch PC-type standard drive; 360Kb

1.2M, 3.5 in.

3.5 inch AT-type high-density drive; 1.2MB

720K, 3.5 in.

3.5 inch double-side drive; 720Kb

1.44M, 3.5 in.

3.5 inch double-side drive; 1.44MB

2.88M, 3.5 in.

3.5 inch double-side drive; 2.88MB

Halt On

This item determines whether the system will halt or not if an error is detected while powering up.

No errors

(Default) The system booting will halt on any errors
detected.

All errors

If the BIOS detects a non-fatal error, the system booting will
stop, and you will be prompted.

All, But Keyboard

The system booting will not stop for a keyboard error. It will
stop for all other errors.

All, But Diskette

The system booting will not stop for a diskette error. It will
stop for all other errors.

All, But Disk/Key

The system booting will not stop for a keyboard or disk
error. It will stop for all other errors.

Press <Esc> to return to the Main Menu page.

«
...
31
32
33
34
35
...
»

Содержание R5120








































































Отзывы:

Нет отзывов

Похожие инструкции для R5120

Z3-DM8168-PCI-RPS

Бренд: Z3 Technology Страницы: 20

Z3-DM8107-SDI2-RPS

Бренд: Z3 Technology Страницы: 75

Бренд: Z-Wave Страницы: 13

Бренд: Klark Teknik Страницы: 50

Бренд: Cypress Semiconductor Страницы: 11

APS6-400 Series

Бренд: Eaton Страницы: 114

Бренд: Daedalon Страницы: 6

Бренд: Advantech Страницы: 36

Бренд: SeaLevel Страницы: 34

Бренд: Disc Makers Страницы: 38

Бренд: DigiTech Страницы: 6

Бренд: AMD Страницы: 45

Бренд: Avigilon Страницы: 12

Бренд: Hologic Страницы: 256

Бренд: BOSER Technology Страницы: 78

Бренд: R3 Страницы: 48

Бренд: Intel Страницы: 469

Бренд: HighPoint Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды