Sealed Air Diversey Care TASKI swingo 2100 micro, Техническое руководство

Страница: 67 / 149

GTS Technical Manual
11. December 2015 Edition: V1.00/2015 5-44
Copyright © 2015, Diversey Care
05
.32
.16
d
riv
e u
ni
t - e
nc
od
er -
2
100
µic
ro_
V1.
00.
fm
5.7 Drive unit
5.7.4 Mounting of encoder
Picture 58: Encoder unit
• Position the housing and mount the 3 screws (if you removed it).
• Position the magnet compl and tighten the screw.
The magnet is only glued onto the bushing. Take care when handling
it.
• Thread in the cable of the rotary encoder.
• Connect the rotary encoder to the electronics.
• Position the rotary encoder onto the housing.
Place the rotary encoder nicely onto the pins on the housing.
Picture 59: Encoder details
Adjustment
Make sure the screw for the magnet compl is in the center of the hole
in the rotary encoder. If this is not the case, then you need to loosen
the 3 screws (4006410) for the housing (4131524) and adjust it.