Sealed Air Diversey Care TASKI swingo 2100 micro, Техническое руководство

Страница: 49 / 149

GTS Technical Manual
11. December 2015 Edition: V1.00/2015 5-26
Copyright © 2015, Diversey Care
05
.30.
13 to
ol low
erin
g un
it
- to
ol low
erin
g un
it
- 210
0µi
cro
_V
1.
00
.fm
Picture 33: Tool lowering unit metal rope
• Position the brush drive into the offset position.
• Line up the back side of the brush motor and the machine
housing by adjusting the metal rope compl on both sides.
Picture 34: Tool lowering unit motor position
Do not tighten the metal rope compl too tight.
The correct tension is, when you steer and the brush drive follows in
the same way without any play.
• Position and tighten the 2 counter nuts for the metal rope compl
adjustment.
• Position the brush drive to the inside of the machine, press the
offset button.
• Turn the brush drive all the way to the LH side, to simulating
driving a left curve.
Picture 35: Tool lowering unit screw position
When the brush drive is all the way to the left, then the positioning
screw (4023420) and washer (4042370) is not allowed to touch the
holder (4131403) of the tool lowering unit.