SEAL AquaSEAL SW-5000, Руководство пользователя

Страница: 6 / 24

Safety Information
5
General
q
Do not operate the machine until it is connected to the proper power source. Refer
to Installation instructions located inside control cabinet.
q
It is strongly recommended that the machine is fed from an “Earth Leakage”
protected electrical outlet – if in doubt, please contact Hunt Technical Services
(contact details in “After Sales Support” section at the rear of the manual) or consult
a licensed electrician.
q
Familiarize yourself with the layout of the Control Panel, and with the operation of
the sealant delivery system.
q
Do not wear loose clothing, and contain loose hair to avoid becoming entangled with
moving parts of the machine.
q
Comply with all safety warning signs, labels, and instructions.
q
Operators should be trained on the proper use of the machine and all safety
procedures.
q
Provide fresh water, clean towels and rubber gloves for use during cleanup.
q
It is advisable to wear eye protection when filling/emptying sealant tank. Always
Provide an approved emergency eyewash station adjacent to the machine.
Figure S-1 shows the safety labels that appear on the AquaSEAL™ SW-5000.
Figure S-1. Safety Labels
Pinch Point
warning labels
Temperature
warning label