SEAL 80Pro, Руководство пользователя

Страница: 39 / 48

Operating 39
English
5.4.4 Pull rollers
The pull rollers are generally used in the encapsulation process (hot processing double
sided lamination) to get a better encapsulation result.
•
Before webbing set the top pull roller in the upper position and lock it on both sides.
•
Webbing is the same as described before, except the films are now, with a leader
board, pushed through the main roller nip and the pull roller nip.
Figure 23: Roll to roll with pull rollers engaged.
5.4.5 Unloading
Unloading can start when the last image is completely through the nip and the pull rollers
when used.
Use a blade cutter to cut the materials.
•
Cut the laminates just before the splitter bars (see Figure
24).
• Let the machine run till the result is out off the pull rollers
(when used).
•
Open the nip and the pull rollers.
•
Pull the materials out of the machine from the rear.
When panels are processed, the last panel is followed by a
leader panel.
•
Feed the leader panel halfway through the nip.
•
Cut the laminates at the splitter bars and the result behind
the main rollers (between last image and leader panel).
•
Then back-up the leader panel instead.
Figure 24: Unloading.