SEAL 65ProMD, Руководство пользователя

Страница: 7 / 63

Table of contentsWarranty and Safety instructions 7
E
n
g
lis
h
5.3 Loading film rolls 44
5.3.1 Auto-grip shafts 44
5.3.2 Use of films with release liner 44
5.3.3 Loading shaft with film rolls 45
5.3.4 Presetting the tension 46
5.3.5 Pressure setting 46
5.4 Webbing 47
5.4.1 Upper section only 47
5.4.2 Upper and lower section 47
5.4.3 Webbing both upper and lower films. 48
5.4.4 Roll to roll 49
5.4.5 Pull rollers 50
5.5 Processes and settings 50
5.5.1 Mounting images or decals 50
5.5.2 Pre-coating panels 51
5.5.3 Single-sided lamination 52
5.5.4 Double-sided lamination 52
5.5.5 Encapsulation 52
5.5.6 Over-lamination 53
5.5.7 Decaling 53
6. Maintenance 56
6.1 Cleaning 56
6.1.1 Cleaning the silicone covered rollers. 56
6.2 Preventive maintenance 57
6.2.1 Auto-grip shafts 57
6.3 Trouble shooting 57
6.3.1 Pressure too high 57
6.3.2 Pressure too low 58
6.3.3 Unwind tension too low 58
6.3.4 Pull tension too low 58
6.3.5 Too much heat in the final result 59
6.3.6 Roller alignment fault 59
6.3.7 Material rolls are jumping 59
6.3.8 Machine operation issues 60
6.3.9 Error Messages on the EOI 60
6.3.10 Technical assistance 61
7. Glossary 62