SEAL 65ProMD, Руководство пользователя

Страница: 59 / 63

Maintenance 59
E
n
g
lis
h
6.3.5 Too much heat in the final result.
Figure 7: Wrinkles due to too much heat.
The result is still too hot after the pull rollers. The bottom pull roller also gets hot.
•
Reduce the heater settings.
•
Check the function of the cooling device or have the device installed.
6.3.6 Roller alignment fault.
Figure 8: Wrinkles due to faulty roller alignment.
The wrinkles occur on one side only (left or right).
•
This is a machine adjustment error. Contact Neschen Americas Technical Support team
or your reseller and ask
for technical assistance.
6.3.7 Material rolls are jumping.
A regular tick can be heard in the shaft suspension.
•
Adjust the shaft support (1) by turning up or down the screw (2) with an Allen key (3).
Figure 9: Shaft support adjustment.