SEAL 54Base, Руководство пользователя

Страница: 9 / 36

Warranty and Safety instructions
7
Engl
is
h
1.4.3 On the machine
On the machine (See Figure 1) you will find the following warning symbols in black on a yellow
background.
ROTATING PARTS (3)
DANGER OF GETTING INJURED BY ROTATING PARTS. MAKE
SURE THAT THESE ROTATING PARTS DO NOT CATCH YOUR
FINGERS, CLOTHING, HAIR, ETC. DANGER DE BLESSURES
PAR LES PIECES EN ROTATION. S'ASSURER QUE CES
PIECES EN ROTATION NE RISQUENT PAS D'ATTRAPER LES
DOIGTS, LES VETEMENTS, LES CHEVEUX, ETC.
This symbol is placed on each cabinet just above the splitter bar (3).
ROTATING PARTS (1)
DANGER OF GETTING INJURED BY ROTATING PARTS. MAKE SURE THAT
THESE ROTATING PARTS DO NOT CATCH YOUR FINGERS, CLOTHING, HAIR,
ETC. DANGER DE BLESSURES PAR LES PIECES EN ROTATION. S'ASSURER
QUE CES PIECES EN ROTATION NE RISQUENT PAS D'ATTRAPER LES
DOIGTS, LES VETEMENTS, LES CHEVEUX, ETC.
This symbol is placed on in-feed table arms and on the cabinets just above the output table (1).
ESD SHOCK (2)
DANGER OF GETTING AN ELECTRIC SHOCK CAUSED BY ELECTROSTATIC
CHARGE BUILD-UP IN THIS AREA. DANGER DE DECHARGE ELECTRIQUE
PROVOQUEE PAR ACCUMULATION DE CHARGES ELECTROSTATIQUES DANS
CETTE ZONE.
This symbol is placed on those places where electrostatic charges can be build-up. The machine
parts close to the nip and the output material are most likely building up charges. Therefore ESD-
symbols are placed on the image guide (2)
Figure 1 : Warning symbol locations.