SEAL 54Base, Руководство пользователя

Страница: 16 / 36

4.2 Installation
Note:
Make sure that the machine, in
its final location, has adequate
space. You will need room to
feed, receive and trim images.
See Figure 6.
L = Maximum board length,
S = Minimum space 60 cm.(24”).
Figure 6: Working space.
1.
Move the machine (and the accessories) to its final location.
2.
Remove all transport material.

Cut the straps around the shaft supports and remove the foam pads,

Cut the straps holding the in-feed table arms,

Cut the straps around the main roller axis and move up the top main roller to remove the
transport blocks from the nip,
3.
Secure machine in place with foot by stepping on the fromt caster’s locking mechanisms. (See
figure 6.)
Note: An uneven floor may affect lamination quality. In the case of an uneven floor, please
contact customer service for the machine leveling option.
WARNING:
MACHINE MUST BE SECURED IN PLACE BEFORE USING .
Figure 7 : Securing machine
Locking
Lever
OFF
ON