Seakeeper 8000 GYRO, Руководство по эксплуатации

Страница: 35 / 49

OPERATION
MANUAL
Product: Document #: Rev: Page:
MODEL 8000 GYRO 90141 3 7 of 11
Section 3: POWER FAILURES, ALARMS, AND TROUBLESHOOTING
Display
Indication
Description Reset condition Troubleshooting
ALARM 55
ANGLE
SENSOR
FAULT
Gyro angle reading
above 81° sensor
damage or a bad
connection.
Gyro angle reading
below 81°
1) Refer to Seakeeper Drawing 90149 Cable Block
Diagram and check sensor connector on Gyro Control
Box.
2) Refer to Seakeeper Drawing 90157 Model 8000
Gyro Assembly and Parts List
under Port Side View and
confirm sensor is still firmly mounted to Gyro.
ALARM 56
ANGLE
SENSOR
FAULT
Gyro angle sensor
reading erratic.
Steady gyro angle
reading.
1) Refer to Seakeeper Drawing 90149 Cable Block
Diagram and check sensor connector on Gyro Control
Box.
2) Refer to Seakeeper Drawing 90157 Model 8000
Gyro Assembly and Parts List under Port Side View and
confirm sensor is still firmly mounted to Gyro.
ALARM 67 X
RATE
SENSOR
FAULT
X Rate sensor inside
Control Box not
working
Functioning sensor Contact Seakeeper distributor for service
ALARM 68 Z
RATE
SENSOR
FAULT
Z Rate sensor inside
Control Box not
working
Functioning sensor Contact Seakeeper distributor for service
ALARM 69 Y
RATE
SENSOR
FAULT
Y Rate sensor inside
Control Box not
working
Functioning sensor Contact Seakeeper distributor for service
ALARM 70
SOLENOID
VALVE 1
FAULT
One of the four
brake solenoid
valves is not
operating correctly
in LOCK mode.
(none)
1) Refer to Seakeeper Drawing 90149 Cable Block
Diagram & check connectors on Brake Solenoid Valves
and on Gyro Control Box.
2) Contact Seakeeper distributor for brake circuit parts
and service.
ALARM 71
SOLENOID
VALVE 2
FAULT
One of the four
brake solenoid
valves is not
operating correctly
in LOCK mode.
(none)
1) Refer to Seakeeper Drawing 90149 Cable Block
Diagram & check connectors on Brake Solenoid Valves
and on Gyro Control Box.
2) Contact Seakeeper distributor for brake circuit parts
and service.
ALARM 72
MOTOR
UNDERSPEED
Gyro unable to
maintain speed
during SEA
(none)
1) Check connectors on Motor Drive Box and Gyro
Control Box.
2) Contact Seakeeper distributor for service.
ALARM 251
NO
CONNECTION
TO GYRO
Control Box not
communicating with
Display
None. Alarm will clear
when communications
resume
If problem persists contact Seakeeper distributor for
service