9
3) Remove the engine. Using an drill bit,
drill the mounting holes through the engine
mount at the four locations marked.
4) Bolt the engine to the engine mount using
the four machine screws. Double check that
all the screws are tight before proceeding.
140mm.
Machine Screw 4x30mm.
Engine 2 stroke:
Engine 4 stroke:
1) Place your engine onto the engine
mount. Adjust the engine is centered of the
edges of the engine case.
2) When you are satisfied with the align-
ment, mark the locations of the engine
mounting.
MOUNTING THE ENGINE.
2) Using the hardware provided, mount the
main landing gear to the fuselage.
M6 X 20mm.
Pushrod wire.
Pushrod wire.
Machine Screw 4x30mm.
4.2mm diameter.
