6
Mount the wheels
(picture 16) and
strongly tighten the ball
nuts (picture 17); often
check their tightening.
If you do not want
checking the wheels
tightening on a regular
basis, you can replace
the ball nuts with
nylstop type nuts.
You may have noticed
that the spindle enters
the wheel and go
through a spacer tube
which sits between the
bearings.
To easily encase the
wheel on the spindle:
enter your finger (the
forefinger) in the hole
bearing in order to
better center the space
tube (picture 18).
The assembly of your frame is now completed. See how easy it was!
Rig assembly
Open the sail bag and assemble the mast sections together.
You have several mast sections (picture 19, a).
Encase them to each other (picture 19, b). All the sections interlock to each other; you will see that you
cannot be wrong. Between each section of the mast, insert a red plastic strip in order to adjust all the
sections (picture 19, c and d). One of the encasing may be different...
Picture 16: mounting the wheels.
Picture 17: ball nut once tightened.
Picture 18: view of the spacer tube
located between the bearings.
Pictures 19:
view of the
various mast
sections and
assembly of this
mast with the
red strips.
a
d
c
b
