CASSUTT 3M RACER.
Instruction Manual
4
INSTALL RUDDER CONTROL HORN.
Required Parts
•
Tail set(Rudder)
•
Fiberglass Control horn(2)
Required Tools and Adhesives
•
30-minute Epoxy
1) Locate the items for this section of the
manual.
Fiberglass control horn
.
2)Position the Control horn on the Tail
set(Rudder) and use 30-minute Epoxy
INSTALL ELEVATOR CONTROL HORN.
Required Parts
•
Tail set(Elevator)
•
Fiberglass Control horn(2)
Required Tools and Adhesives
•
30-minute Epoxy
2)Position the two Control horn on the Tail
set(Elevator) and use 30-minute Epoxy
1) Locate the items for this section of the
manual.
Required Parts
•
Fuselage assembly
•
Engine mount(left and right)
•
Blind nut(4)
•
M4x30mm machine screw(4)
•
M4 washer(4)
Required Tools and Adhesives
•
Phillips screwdriver
•
Thread locker glue
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install the
engine mount included with your model. .
4x30mm.
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
Fiberglass control horn
.
Epoxy.
Epoxy.