Seagull Models YAKOVLEV YAK 3 ARF, Инструкция по сборке

Страница: 18 / 36

YAK 3 Instruction Manual.
18
8) Reinstall the servo horn by sliding the
connector over the pushrod wire. Cent-
er the throttle stick and trim and install
the servo horn perpendiular to the servo
center line.
9) Move the throttle stick to the closed po-
sition and move the carburetor to closed.
Use a 2.5mm hex wrench to tighten the
screw that secures the throttle pushrod
wire. Make sure to use threadlock on the
screw so it does not vibrate loose.
HINH XUA
COWLING.
Please see below pictures.
Cut.