Seagate ST34555N, Руководство по эксплуатации продукта

Страница: 63 / 82

Hawk 4XL Product Manual, Rev. A 53
9.6.4 Mating connectors
Part numbers for the different type connectors that mate with the various Hawk 4XL I/O connectors are given in
the following sections.
9.6.4.1 Mating connectors for “N” model
The nonshielded cable connector shall be a 50 conductor connector consisting of two rows of 25 female con-
tacts with adjacent contacts 0.1 inches (2.54 mm) apart.
Recommended mating flat cable connector part numbers are:
[1] See Figure 15.
The drive device connector is a nonshielded 50 conductor connector consisting of two rows of 25 male pins
with adjacent pins 0.1 inches (2.54 mm) apart. The connector is keyed (see Figure 16).
Mating panel mount connector: 3M-CHE-2050-J01A10-KLE.
9.6.4.2 Mating connectors for “W” model
The nonshielded cable connector shall be a 68 conductor connector consisting of two rows of 34 male contacts
with adjacent contacts 0.050 inches (1.27 mm) apart.
Recommended mating flat cable connector part numbers are:
[1] See Figure 15.
The drive device connector is a nonshielded 68 conductor connector consisting of two rows of 34 female pins
with adjacent pins 0.050 inches (1.27 mm) apart. The connector is keyed by means of its shape (see Figure
17).
Closed end 3M-3425-7000 W/O Strain Relief, No Center Key
(for cable 3M-3425-7050 With Strain Relief, No Center Key
ends)[1] Dupont-66900-290 With Strain Relief, With Center Key
Open end 3M-3425-6000 W/O Strain Relief, No Center Key
(In daisy chain)[1] 3M-3425-6050 With Strain Relief, No Center Key
Dupont-66900-250 With Strain Relief, With Center Key
Amp Model 786096-7 Female, 68-pin, panel mount
Amp Model 786090-7 Female, 68-pin, cable mount
Amp Model 749925-5 (0.050 inches (1.27mm, 50 mil) conductor centers, 28 or 30 AWG wire). Use
two, 34 conductor, 0.050 inches (1.27 mm, 50 mil) center flat cable with this
connector. This type connector can only be used on cable ends. [1]
Amp Model 88-5870-294-5 W/O Strain Relief, 0.025 68es (0.68 mm, 25 mil) conductor centers, 30 AWG
wire. Use either on cable ends or in cable middle section for daisy-chain
installations [1].
Amp Model 1-480420-0 Power connector 4 circuit housing
Berg 69307-012 12-position, 2 x 6, 2 mm receptacle housing