Seagate ST3285N, Руководство по эксплуатации продукта

Страница: 97 / 151

Error code (hex)
Description
Byte 12 Byte 13
40 C1
A failure occurred while the grown defect list
was being written.
40 C2
The write life-cycle of the EEPROM has been
exceeded.
40 C3
There was an attempt to add an illegal entry to
the grown defect list.
40 C4
There was an attempt to add a duplicate entry
to the grown defect list.
41 00 A data path diagnostic failed.
42 00 A power-on or self-test failure occurred.
43 00 A message reject error occurred.
44 00 An internal controller error occurred.
45 00
An error occurred during a selection or a
reselection.
47 00 A SCSI interface bus parity error occurred.
48 00 The initiator has detected an error.
49 00
The initiator received an invalid message from
the drive.
4C 00 Drive failed to self-configure.
4E 00
The drive attempted to perform overlapped
commands.
5B 00 There was a log exception.
5B 01 A threshold condition was met.
5B 02
The log counter has reached its maximum
value.
5B 03 All the log list codes have been used.
5C 00
There was a change in the RPL status. The
drive lost synchronization.
ST3655 Family SCSI Drives Product Manual, Rev. A 87