Seagate ST3160215ACE, Руководство по эксплуатации продукта

Страница: 15 / 48

DB35.3 Series SATA/PATA Product Manual, Rev. F 9
2.1.7.1.1 Representative current profile
Figure 1 Representative 5V startup and operation current profile
Figure 2 Representative 12V startup and operation current profile
2.1.7.2 Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on
the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line.
• Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave
injected noise at up to 10 MHz.
• Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave
injected noise at up to 10 MHz.
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
current.
2.1.7.3 Voltage tolerance
Voltage tolerance (including noise):
5V ± 5%
12V ± 10%