Seagate ST3160215ACE, Руководство по эксплуатации продукта

Страница: 12 / 48

6 DB35.3 Series SATA/PATA Product Manual, Rev. F
2.1.1 Formatted capacity
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environ-
ment and formatting.
2.1.1.1 LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
See Section 4.4, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit
addressing support of drives with capacities over 137 Gbytes.
2.1.2 Default logical geometry
2.1.3 Recording and interface technology
Model
Formatted
capacity*
Guaranteed
sectors Bytes per sector
ST3160215SCE, ST3160215ACE 160 Gbytes 312,581,808 512
ST380215SCE, ST380215ACE 80 Gbytes 156,301,488 512
Cylinders Read/write heads Sectors per track
16,383 16 63
160GB 80GB
Interface Serial ATA and Parallel ATA
Recording method Perpendicular
Recording density, KBPI (kbits/inch max) 824
Track density, KTPI (ktracks/inch avg) 140
Areal density (Gbits/inch
2
avg) 116.2
Spindle speed (RPM) (± 0.2%) 7,200
Internal data transfer rate (Mbits/sec max) 930
Sustained data transfer rate (Mbytes/sec max) 78
I/O data-transfer rate (Mbytes/sec max) SATA - 300
PATA - 100 (Ultra DMA mode 5)