Seagate Pulsar.2 ST100FM0002 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 69

background image

P

ULSAR

.2 SAS P

RODUCT

M

ANUAL

, R

EV

. C

30

6.5.4

Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to
which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in
excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in
Figure 11, and in accordance with the restrictions of Section 10.3.

6.5.4.1

Shock

a. Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding:

• 1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

Note.

This specification does not cover connection issues that may result from testing at this level.

b. Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and
integrated drives.
The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance
degradation.

• 1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis.

c. Packaged

Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM standards. Volume finished
drives will be shipped from Seagate factories on pallets to minimize freight costs and ease material handling. Seagate finished drive
bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive
quantities and proper drive placement.

Figure 11.

Recommended mounting

Note.

Image may not represent actual product, for reference only.

«
...
34
35
36
37
38
...
»

Содержание Pulsar.2 ST100FM0002






































































Отзывы:

Нет отзывов

Похожие инструкции для Pulsar.2 ST100FM0002

Бренд: Overland Storage Страницы: 6

Бренд: U-Line Страницы: 6

URBAN 100.1P DEC

Бренд: garofalo Страницы: 16

DUOTECH HIGH-STORE+

Бренд: Keter Страницы: 31

Бренд: Western Digital Страницы: 2

Бренд: FRANKLINWH Страницы: 81

5BIG THUNDERBOLT 2

Бренд: LaCie Страницы: 20

Бренд: Panasonic Страницы: 33

Бренд: Panasonic Страницы: 48

Бренд: U-Line Страницы: 3

Бренд: iodd Страницы: 16

Vilitas FlashPen USB 3.0

Бренд: Hama Страницы: 4

MiniStation HD-PFU2 Series

Бренд: Buffalo Страницы: 94

Бренд: Lenovo Страницы: 176

Бренд: Symantec Страницы: 2

Бренд: TerraMaster Страницы: 13

Бренд: Fantom Drives Страницы: 10

Бренд: Fantom Drives Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды