Seagate Nytro 2.5” x 7mm SSD Product Manual, Rev. A
21
Standards and Reference Documents
www.seagate.com
4.3.5
European Union (EU) CE Marking Requirements
Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2014/30/EU) put into force on 20 April 2016. Testing is performed to the levels specified by the
product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012, Class B
and the immunity levels are defined by EN 55024:2010.
The drives also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.
Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all
relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level products
into which the drives are installed comply with all regulatory requirements and standards applicable to the system-level
products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed for the drive),
with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and
system integrators should confirm EMC compliance and provide CE marking for the system-level products.
For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2),
see Section 4.4.1 on page 23
.
4.3.6
Australian RCM Compliance Mark
If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the
Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communications and Media Authority
(ACMA).
4.3.7
Canada ICES-003
If this model has the ICES-003:2016 marking it complies with requirements of ICES tested per ANSI C63.4-2014.
4.3.8
South Korean Certification Mark
The South Korean KC Certification Mark means the drives comply with paragraph 1 of Article 11 of the Electromagnetic
Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the
Radio Research Agency (RRA) Communications Commission, Republic of Korea.These drives have been tested and
comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are
tested in a representative, end-user system by a Korean-recognized lab.
4.3.9
Japan VCCI
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause
radio interference. Install and use the equipment according to the instruction guide.
̛
ࣗ
ط
ی
ࡈ
߇
ΰ
ח
%
̗
̛̛
ɼࢽࡈ
؏ܞݦ̛ࢢ
ࢇ
̛̛Е
ɼࢽࡈ
%
̗
ࢷળࢶଢ̛̛Ի۰
࣯Ի
ɼࢽ߾۰
یࡈଜЕ
ʨࡶ
ּࢶࡳԻ
ଜֲ
ֻҘ
एࠇ߾۰
یࡈଟ
ܹ
ݡТЬ
