Seagate Nytro 2.5” x 7mm SSD Product Manual, Rev. A
20
Standards and Reference Documents
www.seagate.com
4.0
Standards and Reference Documents
Each Hard Drive and Solid State Drive ("drives") has a product label that includes certifications that are applicable to that
specific drive. The following information provides an overview of requirements that may be applicable to the drive.
4.1
Regulatory Model Numbers
The following model numbers represent the indicated form factors and features of all configurations within the series:
Regulatory Models as Documented in the Declaration of Conformity (DoC):
STA004 - (represents U.2)
4.2
Standards
The drives are recognized in accordance with UL 60950-1 as tested by UL, CSA 60950-1 as tested by CSA, and EN60950-
1 as tested by TUV.
4.3
Agency and Safety Certifications
4.3.1
Safety Certification
These products are certified to meet the requirements of UL/cUL 60950-1, EN 60950-1, and may also include, IEC 62368,
UL 62368 and EN 62368.
4.3.2
Electromagnetic Compatibility
The drive, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The
drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations nor the
Radio Interference Regulations of the Canadian Department of Communications.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides
reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations of the
Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure
that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the
enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be
used, with the shields grounded to the enclosure and to the host controller.
4.3.3
Electromagnetic susceptibility
The drive as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the responsibility
of those integrating the drive within their systems to perform those tests required and design their system to ensure
that equipment operating in the same system as the drive or external to the system does not adversely affect the
performance of the drive. See Section 1.4, "Power Consumption."
4.3.4
Electromagnetic compliance
Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick
Marking. The drive was tested in a representative system for typical applications. The selected system represents the
most popular characteristics for test platforms. The system configurations include:
Typical current use microprocessor
Keyboard
Monitor/display
Printer
Mouse
Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all
systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide the
appropriate marking for their product.
