Seagate Lyve Rack R1, Руководство по установке

Страница: 33 / 55

Lyve Rack R1 Installation Guide
28
CORTX Virtual IPs
Virtual IPs FQDN
(user provided)
Static IP
(user provided)
Cable no.
(Refer
Figure 14 or Figure
15 )
Management VIP man-0.company.com 192.0.2.10/24 4a/4b
Data VIP s3-0.company.com 203.0.113.10/24 9a/9b
Server A Serial Number & MAC Addresses Associated Cable
no. (Refer
Figure
14 or Figure 15 )
Serial Number: Q114223X9C04398 FQDN (user provided) Assigned IP
(static or DHCP;
user provided)
Management
Interface MAC 00:00:6b:c8:8e:58 srvnode-a.company.com 192.0.2.11/24 4a
BMC Interface
MAC 00:00:6b:c8:8e:2e N/A 198.51.100.11/24
5a
Public Data
Interface MAC 00:01:9b:6b:6c:70 N/A 203.0.113.11/24 9a
Server B Serial Number & MAC Addresses Associated
Cable no(Refer
Figure 14 or
Figure 15 )
Serial Number: Q114223X9C04399 FQDN (user provided) Assigned IP
(static or DHCP;
user provided)
Management
Interface MAC 00:00:6b:c8:92:10 srvnode-b.company.com 192.0.2.12/24 4b
BMC Interface
MAC 00:00:6b:cd:a0:25 N/A 198.51.100.12/24 5b
Public Data
Interface MAC 00:01:9b:6b:6c:58 N/A 203.0.113.12/24 9b
DHCP Server requirements (When DHCP Server is used):
A DHCP Server can automatically assign IP addresses from a pool or can manually assign static virtual
IP addresses based on a hardware MAC address.
• Lyve Rack R1 requires the DHCP Server to support DHCP Static Mapping (also known as static
DHCP lease) which is a feature that enables the assignment of static virtual IP and gateway
addresses as a response to observing a DHCP Client MAC address request.
• The DHCP server must be able to assign network addresses before Lyve Rack R1 is powered
on.
• Once the DHCP server has been configured and has started assigning IP addresses, the DHCP
server must not change the IP addresses.
• If any IP address needs to be changed, please contact Seagate Support.
• If either Server or either High Speed Data Network interface card is replaced, please contact
Seagate Support to obtain assistance with Cluster network configuration.