Seagate Constellation ES Serial ATA Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 47

background image

C

ONSTELLATION

ES S

ERIAL

ATA P

RODUCT

M

ANUAL

, R

EV

. F

17

2.9

E

NVIRONMENTAL LIMITS

Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and
atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 82°F (28°C).

2.9.1

Temperature

a. Operating

The drive meets the operating specifications over a 41°F to 140°F (5°C to 60°C) drive case temperature range with a maximum tem-
perature gradient of 36°F (20°C) per hour.

The maximum allowable drive case temperature is 60°C. See Figure 4 for HDA case temperature measurement location

The MTBF specification for the drive assumes the operating environment is designed to maintain nominal case temperature. The rated
MTBF is based upon a sustained case temperature of 104°F (40°C). Occasional excursions in operating temperature between the
rated MTBF temperature and the maximum drive operating case temperature may occur without impact to the rated MTBF. However,
continual or sustained operation at case temperatures beyond the rated MTBF temperature will degrade the drive MTBF and reduce
product reliability.

Air flow may be required to achieve consistent nominal case temperature values (see Section 3.4). To confirm that the required cooling
is provided for the electronics and HDA, place the drive in its final mechanical configuration, and perform random write/read operations.
After the temperatures stabilize, measure the case temperature of the drive.

b. Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the
drive is packaged in the shipping container designed by Seagate for use with drive.

HDA Temp.

Check Point

Figure 4.

Location of the HDA temperature check point

Note.

Image is for reference only, may not represent actual drive

«
...
20
21
22
23
24
...
»

Содержание Constellation ES Serial ATA
















































Отзывы:

Нет отзывов

Похожие инструкции для Constellation ES Serial ATA

Бренд: trueCall Страницы: 16

ID ISC.LRM200-A/B

Бренд: Feig Electronic Страницы: 20

Бренд: Keter Страницы: 76

Бренд: Et Страницы: 22

Бренд: ATI Technologies Страницы: 24

Бренд: IBM Страницы: 104

Бренд: Ledger Страницы: 7

Бренд: Excel Страницы: 2

storagetek sl150

Бренд: Oracle Страницы: 196

Бренд: IBM Страницы: 36

Бренд: ABSCO SHEDS Страницы: 21

Бренд: AA Products Страницы: 8

USB2.0 Flash Stick

Бренд: Acer Страницы: 11

Бренд: Acer Страницы: 24

USB 2.0 Flash Stick

Бренд: Acer Страницы: 12

RAID Ready Systems

Бренд: Acer Страницы: 21

External Hard Disk Drive 500Gb

Бренд: Acer Страницы: 2

Бренд: Sony Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды