Seagate Constellation ES.1 ST1000NM0001 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 86

background image

4

Constellation ES.1 SAS Product Manual, Rev. A

3.1.2

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking
and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-
tem represents the most popular characteristics for test platforms. The system configurations include:

• Typical current use microprocessor
• Keyboard
• Monitor/display
• Printer
• Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee
that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance
and provide the appropriate marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 2004/108/EC as put into place on 20 July 2007.

Australian C-Tick

If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and
meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Manage-
ment Agency (SMA).

Korean KCC

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of
Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility
(EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission,
Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic
Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a
Korean-recognized lab.

• Family name:

Constellation ES

• Certificate number:

STX-ST2000NM0001 (B)

• Date of Certification:

22 December 2010

• Manufacturer/nationality: USA, Singapore and China

Taiwanese BSMI

If this model has two Chinese words meaning “EMC certification” followed by an eight digit identification num-
ber, as a Marking, it complies with Chinese National Standard (CNS) 13438 and meets the Electromagnetic
Compatibility (EMC) Framework requirements of the Taiwanese Bureau of Standards, Metrology, and Inspec-
tion (BSMI).

«
...
10
11
12
13
14
...
»

Содержание Constellation ES.1 ST1000NM0001























































































Отзывы:

Нет отзывов

Похожие инструкции для Constellation ES.1 ST1000NM0001

Бренд: WiebeTech Страницы: 4

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 126

Бренд: Galvo Shed Страницы: 2

Бренд: QNAP Страницы: 55

Бренд: VOLTGEAR Страницы: 16

Barracuda 9LP ST34573LC

Бренд: Seagate Страницы: 60

Barracuda 18 ST118273LC

Бренд: Seagate Страницы: 60

8-BAY RACKMOUNT NAS

Бренд: Seagate Страницы: 20

Бренд: Seagate Страницы: 70

BlackArmor NAS 420

Бренд: Seagate Страницы: 64

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 2

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 3

Бренд: Sealey Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды