Seagate Constellation ES.1 ST1000NM0001 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 86

background image

Constellation ES.1 SAS Product Manual, Rev. A

5

3.1.3

European Union Restriction of Hazardous Substances (RoHS)

The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemi-
cal substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic prod-
ucts, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS
Directive.

A number of parts and materials in Seagate products are procured from external suppliers. We rely on the rep-
resentations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our
supplier contracts require compliance with our chemical substance restrictions, and our suppliers document
their compliance with our requirements by providing material content declarations for all parts and materials for
the disc drives documented in this publication. Current supplier declarations include disclosure of the inclusion
of any RoHS-regulated substance in such parts or materials.

Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws
and regulations which restrict chemical content in electronic products. These systems include standard operat-
ing procedures that ensure that restricted substances are not utilized in our manufacturing operations, labora-
tory analytical validation testing, and an internal auditing process to ensure that all standard operating
procedures are complied with.

3.2

Reference documents

SAS Interface Manual

Seagate part number: 100293071

SCSI Commands Reference Manual

Seagate part number: 100293068

Self-Encrypting Drives Reference Manual

Seagate part number: 100515636

ANSI SAS Documents

SFF-8323

3.5” Drive Form Factor with Serial Connector

SFF-8460

HSS Backplane Design Guidelines

SFF-8470

Multi Lane Copper Connector

SFF-8482

SAS Plug Connector

ANSI INCITS.xxx

Serial Attached SCSI (SAS) Standard (T10/1562-D)

ISO/IEC 14776-xxx SCSI Architecture Model-3 (SAM-3) Standard (T10/1561-D)

ISO/IEC 14776-xxx SCSI Primary Commands-3 (SPC-3) Standard (T10/1416-D)

ISO/IEC 14776-xxx SCSI Block Commands-2 (SBC-2) Standard (T10/1417-D)

ANSI Small Computer System Interface (SCSI) Documents

X3.270-1996

(SCSI-3) Architecture Model

Trusted Computing Group (TCG) Documents (apply to Self-Encrypting Drive models only)

TCG Storage Architecture Core Specification, Rev. 1.0

TCG Storage Security Subsystem Class Enterprise Specification, Rev. 1.0

Specification for Acoustic Test Requirement and Procedures

Seagate part number: 30553-001

In case of conflict between this document and any referenced document, this document takes precedence.

«
...
11
12
13
14
15
...
»

Содержание Constellation ES.1 ST1000NM0001























































































Отзывы:

Нет отзывов

Похожие инструкции для Constellation ES.1 ST1000NM0001

Бренд: Seagate Страницы: 24

NSLU2 - Network Storage Link NAS Server

Бренд: Linksys Страницы: 64

Бренд: QNAP Страницы: 7

G-SPEED SHUTTLE with Thunderbolt 3

Бренд: G-Technology Страницы: 8

Бренд: Hama Страницы: 8

Бренд: DIVERSIFIED WOODCRAFTS Страницы: 6

Бренд: NCR Страницы: 12

Бренд: Wayfair Страницы: 22

Бренд: Rockler Страницы: 4

Бренд: Argus Страницы: 1

Memorator Pro 5xHS

Бренд: Kvaser Страницы: 27

Бренд: Pioneer Страницы: 32

IO90.195.060.K1.WDC

Бренд: asecos Страницы: 11

Бренд: Excito Страницы: 154

Бренд: Bosslan Страницы: 78

Бренд: Shad Страницы: 4

XCubeNAS XN5008T

Бренд: Qsan Страницы: 48

Бренд: ECOSAFE Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды