Sonarmite Settings
On the next few pages we will review the several output data formats, how to change
them and changing sound velocity.
1.
Put transducer in water. Can be small bucket.
2.
Insert transducer connector to Sonarmite control box, look for blinking red light.
3.
Connect to terminal program.
a.
SENA BTERM via Bluetooth:
http://seafloorsystems.com/pdf/sena_bterm.pdf
b.
WCOM32 Bluetooth or serial to laptop, software is included on Sonarmite
CD.
4.
View streaming data
Control F will cycle through the output formats below.
Control S will save the output format.
Control R will reset the system to default output, MUST be in system format for this
to work.
a.
Format Old Sonarmite (example output below
)
1 0.48 0 0 0 8.9 115 0
1 0.48 0 0 0 8.9 115 0
1 0.48 0 0 0 17.8 116 0
1 0.48 0 0 0 8.9 115 0
1 0.48 0 0 0 8.9 115 0
Old Sonarmite format is the default format. Trimble, Carlson, SM Mobile
and Hypack all use these formats. The 0.48 is the depth, the 8.9 is the volts
