SeaDoo 2002 GTX 4-TEC Скачать руководство пользователя | Manualshive

Страница: 18 / 100

background image

16

Parts covered for 2002 SEA-DOO GTX

†

4-TEC:

The emission warranty covers damage to other engine components that is caused by the
failure of a warranted part.
The Bombardier

Operator’s Guide

provided contains written instructions for the proper

maintenance and use of your personal watercraft. All emission warranty parts are warrant-
ed by Bombardier for the entire warranty period of the watercraft, unless the part is sched-
uled for replacement as required maintenance in the

Operator’s Guide

.

Emission warranty parts that are scheduled for replacement, as required maintenance, are
warranted by Bombardier for the period of time before the first scheduled replacement
date for that part. Emission warranty parts that are scheduled for regular inspection, but
not regular replacement, are warranted by Bombardier for the entire warranty period of
the watercraft. Any emission warranty part repaired or replaced under the terms of this
warranty statement is warranted by BOMBARDIER for the remainder of the warranty pe-
riod of the original part. All parts replaced under this limited warranty become the property
of BOMBARDIER.
Maintenance receipts and records should be transferred to each subsequent owner of the
watercraft.

Owner’s Warranty Responsibilities

As the personal watercraft engine owner, you are responsible for the performance of the
required maintenance listed in your

Operator’s Guide

. BOMBARDIER recommends that

you retain all receipts covering maintenance on your personal watercraft engine, but
BOMBARDIER cannot deny warranty solely for the lack of receipts or your failure to ensure
the performance of all scheduled maintenance.
As the personal watercraft engine owner, you should however be aware that
BOMBARDIER may deny you warranty coverage if your personal watercraft engine or a
part has failed due to abuse, neglect, improper maintenance or unapproved modifications.
You are responsible for presenting your personal watercraft engine to an authorized
BOMBARDIER dealer as soon as a problem exists. The warranty repairs will be completed
in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities or for the
name and location of the nearest authorized BOMBARDIER dealer you should contact the
Customer Assistance Center at 1-715-848-4957.

© 2001 Bombardier Inc. All rights reserved
® ,™ Registered trademarks of Bombardier Inc. or its subsidiaries.
† Trademark of Castrol Ltd, used under license.

Digital Linear Actuator (Low Idle Control)

All Fuel System Components

Throttle Position Sensor

Spark Plugs

Intake Manifold Air Pressure Sensor

Ignition Coils

Intake Manifold Air Temperature Sensor

Piston & Rings

Engine Temperature Sensor

Intake and Exhaust Valve Gear/Train

Knock Sensor

Valves, Valve Guides, Valve Guide Sealing

Emission Control Unit

Crankcase Ventilation Valve

Injectors

Wire Harness and Connectors

Fuel Pressure Regulator

Emission Related Seals, Gaskets and
Hoses

smo2002-003_a.book Page 16 Friday, October 12, 2001 2:04 PM

«
...
16
17
18
19
20
...
»

Содержание 2002 GTX 4-TEC





































































































Отзывы:

Нет отзывов

Похожие инструкции для 2002 GTX 4-TEC

Бренд: grabner Страницы: 4

Бренд: Four winns Страницы: 134

Бренд: Four winns Страницы: 140

Бренд: Malibu Boats Страницы: 76

Бренд: HydroBikes Страницы: 24

AR230 High output

Бренд: Yamaha Страницы: 114

MERRY FISHER 585

Бренд: Jeanneau Страницы: 62

Бренд: Malibu Boats Страницы: 102

Бренд: Ranger Tugs Страницы: 40

Classic Big Game

Бренд: Ocean Kayak Страницы: 1

Бренд: Grady-White Boats Страницы: 111

Бренд: whaler Страницы: 184

Бренд: Carolina Cat Страницы: 65

Бренд: Sea Ray Страницы: 50

Бренд: Prima Vista Страницы: 28

Бренд: ProBoat Страницы: 8

Impulse 31 PRB08008

Бренд: ProBoat Страницы: 15

Бренд: ProBoat Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды