Website: www.seada.co.uk
11/18
E-mail: [email protected]
(1)
Click “Edit” to enter
the following page.
(2)
Configure the items in the picture above.
•
Command Name
: Set a name for this command.
Note:
Th
e length of each “Command Name” shall not exceed 32 characters and can
include letters, numbers, and underscores.
•
HEX String Enable
: Select the command type accordingly to the controlled devices
•
Command:
When the command is string, it will have the end flag for selections, but
when use HEX, it will be no end flag.
(3)
Click “Save” or “Cancel” to save or cancel the configurations above.
If you
click “Save”, the page will return to the “Command Settings” tab automatically.
Note:
The “Remove” button in last co
lumn allow you to remove the corresponding
command of third-party device.
(4)
Repeat steps from (1) to (3) to program other commands.
After “
Command Settings
” is configured successfully, click “Key Settings” to configu
re commands
for each keypad button. For each button, it can configure 6 commands at most.