Website: www.seada.co.uk
8/18
E-mail: [email protected]
The controlled devices can be connected to LAN (via network) port or RS232 port of the keypad.
Users can configure IP control parameters and RS232 control parameters for these most used
devices by clicking the
“
Edit
”
to start:
6.1 Configurations of IP Control:
(1)
Click the first “Edit” to
enter device name and IP information like the following page.
(2)
Configure the items in the picture above.
•
Device Name
: Configure a device name for the controlled third-party device.
Note
: The length of eac
h “Device Name” shall not exceed 16 characters and can
include letters, numbers, and underscores.
•
IP Address:
Input the IP address of the controlled device.
•
Connect Port
: Input the port number of the controlled device.
•
Username
: Input the telnet control username of the controlled device.
•
Password
: Input the telnet control password of the controlled device.
Note
: The Connect Port, Username and Password are provided by third-party devices
manufacturers and can be found in instructional documentations.
