G44 HDMI User Guide
4.6.
Video Wall
Click to select the screen, then drag & select the screens to splice, right-click, and click Screen
splicing to form a video wall
•
Screen Splicing
- This combines the selected screens into one and displays the selected input
across all of the splicing screens. For example, in the setup below 2x2, if all of them are
spliced, then the input selected by the user will be displayed across all the 4 screens (Note:
this is not the same as duplicating a single input on each output)
•
Cancel Splicing
–
This will cancel the video wall and revert to the matrix switching mode
•
Input Select
–
Similarly to the video routing matrix, this allows the user to control which
output is displayed on which screen (Note: Selecting an input on any of the screens when
spliced will display it on the spliced screen and not on the individual screen)
•
Output Select
–
The user can control which screen should be mapped to which output
•
Output Type
–
Allows the user to adjust the type of the output
–
HDM or DVI.
•
Output Format
–
Controls the resolution of the output
•
Horizontal adjust
–
Lets the user adjust the horizontal position of the screen
•
Vertical adjust
–
Lets the user adjust the vertical position of the screen
The user can save the video wall preset layouts and load it later via the Save Layout and Load Layout
dropdown menu.
