G44 HDMI User Guide
•
Read
–
This function will read any existing OSD settings on the screen.
•
Import
–
This allows the user to import any OSD settings from another control PC (Any
settings that have not been saved on the device itself)
•
Export
–
The user can export any of the OSD settings from this software into an .osd file
•
Reset
–
This resets the OSD settings to factory default.
The mode save and mode load settings allow the user to load a pre-existing OSD preset and to save
the current one into one of the 8 slots (Note: These mode slots are different than the Matrix Switch
modes and there are only 8 of them)
4.5.2.
Text Settings
The user can apply the OSD settings to one
screen at a time. The
Board Address
dropdown
menu dictates which screen is the OSD being
setup on.
Display
will hide or show the text
Transparent
when selected off will apply a solid
background to the text so that it is more easily
readable. When selected on it will remove the
solid background and only the text will remain.
The
alpha
slider dictates how opaque the text is
–
0 being invisible and 255 being 100% opacity.
Text Color will change the color of the text only. This
setting has 5 color slots, however when clicking the
dropdown menu and clicking on one of the 5 colors,
it will select that slot and open the menu at left. This
allows the user to customize the colors they want.
The
BACKGROUND COLOR
is similar to the Text
Color setting; however, it only applies to the
background (Only works if the Transparent setting is
off)
Position
can be relative or absolute. Relative will
allow the customer to align the text
–
Top/Middle/Bottom vertically, and/or Left/Middle/Right
horizontally. Absolute will allow more flexibility for the customer as it allows for X and Y positioning
of the text.
Font allows the user to select from three different fonts
–
SimHei, KaiTi, SimSun. The dropdown
menu next to the font controls the size of the text.
Set applies the changes.
