manualshive.com logo in svg

Seac ACTION, Руководство пользователя

Поделиться
Скачать
Seac ACTION Скачать руководство пользователя страница 39

ACTION

39

No-fly time

Under the DAN protocol, the NoFly time is calculated according to the following 

rules (Revised Flying After Diving Guidelines for Recreational Diving – May 2002):
-  12 hours for a single dive (no dive in the preceding 48 hours) within the no-

decompression limits.

-  18 hours for repetitive dives without decompression on the same day or multiday. 
-  24 hours for repetitive dives with decompression on the same day or multiday.
Since the scenarios that have been studied are limited and the Dive Computer 

allows you to assess exactly the load in each individual tissue, the following 

strategy will be adopted, in favor of safety:
-  The NoFly time is calculated according to the Buhlmann algorithm.
-  If the time calculated is lower than the time indicated by the DAN protocol, 

then the time obtained from the DAN protocol is used.

-  If the time calculated is higher than the time indicated by the DAN protocol, 

then the time obtained from the Buhlmann algorithm is used.

The calculation method according to the Buhlmann algorithm will be done 

using 0.550bar as the cabin pressure. This is the minimum pressure recorded 

in commercial aircraft.
Special cases:
1.  If you have not taken any dive, in any mode, in the previous 48 hours:

a.  If you take a dive in GAUGE mode, the NoFly time will be 24 hours.
b.  If you take a dive in FREE mode, the NoFly time will not be calculated.

2.  If you took a SCUBA dive (of any kind):

a.  If you take another dive in GAUGE mode before the NoFly time expires, 

after the dive in GAUGE mode the NoFly time will be 24 hours.

Содержание ACTION

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды