Seac ACTION, Руководство пользователя

Страница: 26 / 48

26
time be shown on the lower right: “+1 / -1”.
For each mode, set the choice using the HR (+) and LR (-) buttons and confirm
with the LL button (Mode) and move to the next selection. Press LL and LR at
the same time to return to the main view.
PC Mode
To connect your Action to a PC or Mac to link with the Dive Logger software and
download your data, your Action must be set to this mode before you connect it
to the computer with the special USB cable (optional).
Info mode
The Info screen shows:the name of the model, the serial number (which is also
laser engraved on the back of the case), and the firmware version installed.
Reset
Resetting tissues and user settings is a risky procedure, especially if the diver is
taking repetitive dives. Therefore you have to confirm twice before a reset will
be performed:
Enter a four-digit security code. The security code is “
5555 ”.
If the code entered is valid, before performing a reset, you will need to confirm
the operation.
If the operation is successful, the message “
RESET DONE ” will appear.
• WARNING!
On the watch screen, the icon of the “WARNING” symbol will appear on
the lower left to alert the diver and remind them that the computer was
reset. This symbol will disappear after the next SCUBA/GAUGE/FREE dive.
•
WARNING! DANGER!
Do NOT perform the tissue saturation reset if the device will be used soon
by the same person!
This can lead to the risk of accidents, including fatal ones.
The tissues can only be reset if the Action will be used by a person who
has not taken any dives in the previous 48 hours.