E-14
Mounting the camera in the Housing
10
1
Open the locking latches
2
Remove the rear case
3
Set the quick lock to the OPEN position
Removing the camera from the housing
4
Slide the camera toward you as you remove the front case
Be sure to release the depressed
mode dial lock button before setting
the rear case.
9
Attach the L-hook to the front
case
L-hook
Align the quick lock with the
LOCK position to fix the camera
in place
8
Make sure that the O-ring is properly fitted in the
O-ring groove before setting of the rear case.
Close the locking latches
See:
“Opening and Closing the Housing” (P.E-9)
After the camera is mounted in the housing, make sure to check that all of
the housing's control parts work properly and the camera functions correctly.
CAUTION
CAUTION
If you find the fix screws are too tight, use a coin or similar object to loosen
the screws.
