SEA USER 2 24V DG R1B ALL-IN, Руководство пользователя

Страница: 29 / 40

SET DESCRIPTION
DEFAULT NOTE
Off Disabled
Emergency
Without main power but batteries connected, the gate
will open fully and will remain opened. The gate recloses
when the power is back
Last opening
Without main power, if batteries are lower than 22V the
gate opens and stay opened. The gate recloses when the
power is back
Last closing
Without main power, if batteries are lower than 22V the
gate closes and stay closed until the power is back
117 ALWAYS CLOSE Off 240 seconds
In the event of a power failure, if the door has been
manually opened, it closes only after the set time has
elapsed (from 0 to 240 seconds), as soon as the power is
restored
Off
Off Disabled
Opening
Uses the "Partial Opening" N.O. input (the "Partial
Opening" is so disabled). The gate opens and stay open
till a new Start input
Closing
Uses the "Partial Opening" N.O. input (the "Partial
Opening" is so disabled).The gate closes and stay closed
till a new Start input
119
DISPLAY WRITING
SPEED
From 30% to 100% See Note 2 below
80%
120 BASIC MENU
Note 1: After initialization the parameters "motor type" and "limit switch type" remain on the value chosen in the setup
program
Note 2: Display writing speed set on 30% keeps writing slow; Display writing speed set on 100% keeps writing fast.
Please note that speed does not change on JOLLY 3 display
113 EMERGENCY
Off
Press OK to exit the special menu.
The special menu switches off automatically after 20 minutes
SP MENU
118 LATCH
Off
LATCH FUNCTION NOTES:
- To deactivate the Latch function, press the Latch command again or the Stop command or remove the power supply;
- The Latch function can also be activated by remote control or by SEACLOUD; if the Latch function is active, pedestrian opening will still be
possible both from the remote control and from SEACLOUD
60